银河龙芯推出落地双枪7KW/22KW欧标美标交流充电桩
银河龙芯推出落地双枪7KW/22KW欧标美标交流充电桩
IoCharger provides the high quality, yet cost effective electric vehicle charge point, which is designed to offer full Mode 3 fast charging to every Electric Vehicle (EV/PHEV).
With OCPP1.6J integrated, the charger can be easily connected to the charging management system for easy operation, monitoring, and maintenance.
•IEC 61851-1 Mode 3 fast charging
•IEC 62196 dual Type-2 sockets•Charging speeds - dual 22KW (32A)
•Built-in overload and fault current protection
•Built-in LED charging status indicator
•MID certified energy meter
•Built-in RCCB Type-B
•IP grade 55 IEC 60529
•CE Compliant
•Full OCPP 1.6J commands support
•OCPP profiles 1: Firmware Management and Remote Trigger
•OCPP profiles 2: Smart Charging
•OCPP profiles 3: Local Auth List Management and Reservation
SPECIFICATION DATASHEET | |||
Model | IOCAP06C-22 | ||
Power Input | Input Rating | 1-phase 230V ±20% , 32A x 2 | |
Standby Power | < 5 W | ||
Power Output | Output Rating | dual 22KW 3-phase, 32A | |
Protection | Internal Residual Current Detection | Type-B RCCB | |
Over Current Protection | Dual MCB 50A | ||
Lightning Protection | SPD 40KA | ||
Energy Meter | CE & MID Certified | ||
Electrical Protection | Over current, short circuit, over voltage, under voltage, ground fault, lightning surge, over temperature | ||
User Interface & Control | Status Indicators |
LED
light indicating state of charger: charging, faulty or available |
|
Display | 7' LCD Display | ||
User Authentication | RFID card reader. ISO/IEC 156963 and 14443 | ||
Buttons/Switches |
2
Physical button for charging connector selection, and also output current adjustment |
||
Environmental | Operating Temperature | (-30℃ to +55℃) in operation, (-40℃ to +80℃) in storage | |
Humidity | 95% relative humidity, non-condensing | ||
Mechanical | Mounting Type | Pedestal Type | |
Dimension (W x H x D) | 350 x 1435 x 200 mm (with 4G antenna) | ||
Net Weight | 37Kg | ||
Communication | Network Interface | Ethernet, 4G | |
OCPP | OCPP 1.6J | ||
Regulation | Certificate | IEC61851-1, CE | |
Charging Interface | IEC 62196 Dual Type 2 sockets with cable lock |
上一篇: |